DTS 2077
Wavecrests DTS line and companion software provide unprecedented speed,
accuracy and resolution in test and measurement of jitter and critical
time measurements in semiconductor devices and systems. Patented
algorithms provide the only available solution of complete high-speed
analysis in
all three critical domains of time, frequency and modulation. This
system will do it all; design, debug, characterisation/validation
, customer and vendor correlation and volume production test.
The WAVECREST DTS-2077 is a high-performance Timing Analyzer used
for the debug, characterization and production test of high-performance,
high frequency devices and circuits. The stringent timing specifications
of today’s data communications devices require a signal integrity
analysis solution that outperforms general test instruments.
Timing uncertainties such as jitter, propagation delay, frequency modulation
and crosstalk can easily be analyzed and tested with the DTS-2077. This
capability can be used on either data signals or clock signals.
Wavecrest Introduction Page
DTS 2077
| Frequency Range |
0.4Hz to 1.3GHz |
| Maximum Data Rate |
2.5 Gbs |
| Minimum Pulse Width |
380 ps |
| Jitter Noise Floor |
Is < 6ps rms (3ps rms typical at cal frequency)(1) |
| Jitter Measurement Accuracy |
< 2ps (2) |
| Hardware Resolution |
680fs |
| Time Measurement Range |
±2.5s |
| Frequency Measurement Accuracy |
1PPM |
| Time Base Accuracy |
1PPM |
| Time Base Stability (Short Term Aging) |
5x10-11 |
| |
|
| Voltage Performance: |
|
| Input Range |
±1.1V(50 Ohm load) |
| VREF Accuracy |
±(1.5 mV+0.75% of setting) |
| VREF Resolution |
150µV |
| |
|
| Automatic Arming |
Used for serial data streams and clock signals that repeat
indefinitely. This feature is critical in enabling clock-less
data signal analysis. |
| Internal Sampling Oscilloscope |
Used for identifying signal characteristics that are present
at the channel input. The oscilloscope has an effective sampling
rate of 100GHz. |
| User Programmable Subroutine Memory |
Used for developing production and characterization scripts
to enhance throughput and measurement time. |
| Built-In Internal Calibration |
Used for self-calibration of internal hardware. External reference
ports accessible on back panel for accuracy verification. |
| Built-In External Calibration |
Used for timing and voltage deskew of cables, probes and other
interconnect hardware. |
| |
|
| Specifications subject to change without notice. |
|
| |
|
| (1) Jitter Noise Floor is the minimum Jitter measurement that
can be made. This measurement is an accumulation of several jitter
frequency components and their effect on the measurement in question.
The Jitter Noise Floor measured in the Frequency domain is less
than 1ps. |
| (2) Jitter Measurement Accuracy is a function of the hardware's
measurement repeatability. |
If you require further information please click on the "More Information" link
at the top of the page and one of our team will provide any details
you may require.
Or contact us directly:
Firfax Systems Ltd
Meteor Business Park,
Gloucestershire Airport,
Cheltenham Road East,
Gloucester,
GL2 9QL, UK.
T. +44 (0) 1452 717 800
E. sales@firfaxsystems.co.uk
